Mr. Coffee Cafe Barista (BVMC-ECMP1102) Review

Today’s review is dedicated to one of the most demanded coffee machines to date. There are lots of inquiries, and current owners try to persuade others that this is the best appliance ever. It’s about Mr. Coffee Cafe Barista, and MilkFrotherTop will reveal the truth about it. Let’s get started!

Design and Main Parts of Mr. Coffee Cafe Barista

The exterior of the Mr. Coffee Cafe Barista is plastic. However, the main parts such as a brew head, a portafilter, and a frothing nozzle are made of stainless steel. It comes in several color options: red, silver, and white. Due to a sleek and modern design, the appliance may fit into any kitchen.
The Mr. Coffee Cafe Barista is a semi-automatic machine with automatic milk frother that brews not only espresso but also latte and even cappuccino with thick froth. It doesn’t require a lot of effort from the user to make the desired drink. In addition, it’s quite clear how to use it even without reading the instructions. Here are some of the specification highlights of the BVMC-ECMP1102 model.

The control panel is a prime example of how easy-to-use this machine is. There is a set of buttons the purpose of which is shown in the pictures. So it will be quite difficult to make a mistake when selecting the drink you want.

The brewing unit is actually a nozzle that supplies warm water directly into the portafilter with the ground coffee;

The milk frother is actually a separate plastic compartment where milk is poured and a special nozzle that produces foam for coffee drinks. There are 2 modes for latte and cappuccino, and the more the dial is inclined to the “cappuccino” sign, the more froth there will be. By switching the device to the “latte” mode, you’ll get an appropriate amount of steamed milk for this kind of drink.

The water reservoir is at the back of the device. It is made of transparent plastic and can accommodate up to 54 ounces of liquid. This capacity is enough to brew 6 full cups.

After each brewing cycle and removing a cup to sip your coffee, there may appear some excessive drops. All of them are caught by the drip tray with a grid that is easy to clean by removing it and rinsing under tap water.

How to Use Mr. Coffee Cafe Barista Espresso Maker?

Before the first launch, every coffee machine should be run through an idle cycle so all the parts can clean well. So, plug the machine in, remove all the labels and transportation films. Then take out the water reservoir and remove the red plug from it. Once all the auxiliary tools and reservoirs are removed, you should submerge them in a solution of water and mild detergent, then rinse them under tap water. After that, pour some water into the water reservoir and milk tank, install them in their place and run the first cycle. As soon as it’s finished, you can prepare the machine for the real brewing cycle by adding water to the water reservoir and milk to the milk tank up to the max level.

Now you can brew your desired drink, but you should think about its size in advance since the filter volume, as well as the cup, has to be appropriate. By the way, for placing a small cup, you can use an adjustable platform, which is hidden under the frother, so the drink won’t splatter. Then load some ground coffee into the portafilter and tamp it. You can do this with a special tool that is a scoop and a tamper at the same time. Set the portafilter into a brew head.

Selecting the type of beverage is the simplest thing ever. You need to press the corresponding button once for a single shot and twice for a double shot. By the way, there are 2 modes for each button: automatic and manual. If you need some customization, then hold the button for 3 seconds. The Espresso button is responsible for adjusting brew volume, the Cappuccino one – the amount of froth. Wait some time and voila – your coffee is ready!

How to Clean This Programmable Cappuccino Maker?

Of course, after each brewing cycle, the machine should be cleaned. However, unfortunately, not everyone knows how to clean it properly.

The first thing you should do is to detach the portafilter and remove wet grounds from the filter. Rinse the portafilter and filter and place them on a dry piece of cloth so they can dry out for the next cycle. Please note that these parts are not dishwasher safe.

After that, you need to wipe the surface of the device with a wet piece of cloth but don’t use abrasive solutions. Once the reservoirs are empty, they should be cleaned too but not in a dishwasher.

No matter how well your espresso and cappuccino maker works, it should be descaled once in a while depending on the type of water you use. The harder the water, the more often it should be descaled. This procedure has to be done with a special descaling solution or simply with vinegar, but always follow the manufacturer’s recommendations and rules. You should perform each step carefully so there won’t be any problems in the future.

If you need just to perform a cleaning procedure to the clogged nozzle of the frother, switch the dial on the device to the “clean” mode. Then place an empty cup under the nozzle, make sure there is some water in the water tank, and press and hold the Latte/Clean button until the pump starts. The cleaning process will run for 30 seconds and then stop automatically.

Other Features You Need to Know

If you are not fond of whole milk but still want a frothy coffee drink, you don’t need to be upset at all. According to numerous reviews on social media, this machine, particularly the frother, is able to produce nice thick froth using any type of milk: soy, almond, oat, etc. Isn’t it awesome?

There is one more feature that will be quite beneficial for you. This machine is energy-saving, so after 15 minutes of non-use, it switches to the standby mode.
And, here’s something that will persuade you to buy this device. The illuminated buttons are not just part of the design: they have their own function. In particular, depending on how and where they blink, they tell you what to do with the machine.

Advantages and Disadvantages

For a better understanding of whether this device is worth your attention or even being in your kitchen, the above-mentioned information may not be enough. That is why you may want to know the points of view of those who’ve already bought this machine. So here they are.

Troubleshooting Tips

Lots of people encounter some problems while using their beloved devices. However, it doesn’t mean that there is no solution. In fact, each manufacturer supplies its product with a troubleshooting guide, so none of the users will be disappointed in it. Here are the tips that may help you deal with some issues arising during the use of the Mr. Coffee Cafe Barista machine.

Where to Buy Mr. Coffee Cafe Barista BVMC-ECMP1102 Maker?

Despite the fact that now is the age of opportunities and everyone can get anything they want on the Internet, lots of people wander without a certain answer or information. One of the questions most frequently asked by potential buyers is where to get the Mr. Coffee Cafe Barista. 

In fact, just typing the key words in the search field, you’ll get lots of offers. Certainly, the manufacturer’s official website and sales platforms such as Amazon are really good places to visit, and also, don’t forget about eBay. However, you can find the desired device in well-known supermarkets including Walmart. The same applies to Bed Bath and Beyond where you can also find some supplies for your machine.

Final Thoughts

If it’s necessary for you to get the best result out of your coffee maker, but still, you want to control its operation, then there is no better option than the Mr. Coffee Cafe Barista. These two things can be achieved by combining automatic and manual modes. Besides, you can even adjust the thickness of froth for your cappuccino. Note that such a feature is not available in every coffee machine. So if you like these things, then don’t waste your time and get this device as soon as possible! It’s highly recommended by MilkFrotherTop.

References